The best USB-C hubs for iPad

• Colors: Space Gray, Silver
• Ports: USB-C PD (5Gbps/60W), USB-A (5Gbps), HDMI, microSD and SD card readers, 3.5mm audio
• Compatible with: All USB-C iPads

Why we love it: The HDMI port means you can add an external display, and it can handle 4K displays at 60Hz, although that might be a push if you are using all the other ports at the same time.

This good-looking iPad-dedicated hub, with built-in USB-C connector, features a grip that secures it onto an iPad Pro without damaging the surface. However, you can remove the grip if you use a third-party iPad case. It connects direct to the iPad but handily also comes with a USB-C extender cable so you can use it as a USB-C hub for your MacBook or another USB-C device, too. It can charge a device at up to 60W.

It’s also lightweight at just 33g (1.16oz) and at 3.66 x 1.3 x 0.39 inches (9.3 x 3.3 x 1cm) it’s small enough to slip into a pocket.

If you don’t need the memory card readers, the $59.99 HyperDrive 4-in-1 USB-C Hub for iPad, available in either Silver or Space Gray, adds four ports: 4K 30Hz HDMI, 60W USB-C power delivery, 5Gbps USB-A, and 3.5mm audio jack. It weighs just 1.34oz (38g).

• Colors: Transparent gray
• Ports: USB-C (to iPad), USB-C PD (100W), USB-C PD (10Gbps), microSD card reader (33MBps)
• Compatible with: All USB-C iPads

Why we love it: This is the smallest and lightest USB-C hub we tested weighing just 16g (0.57oz). Its dimensions are 2.42 x 0.93 x 0.35 inches (6.2 x 2.4 x 0.9cm) so It’s even smaller than the Twelve South StayGo mini and a few grams lighter.

This mini hub Is aimed at users with XR glasses but is just as able connected to your iPad to deliver up to 100W of passthrough power (35W for iPad) and a 10Gbps USB-C port that can link to a 4K display at 60Hz. The third port is a microSD card reader that, at 33MBps, is particularly slow but useful for uploading or off-loading photos and videos from the tablet.

There is no legacy USB-A port, so if that’s important to you keep looking at what the other reviewed iPad hubs offer.

There is an alternative version, the Satechi Mobile XR Hub with Audio, which swaps the card reader for an audio port.

• Colors: Space Gray
• Ports: USB-C (to iPad, 10Gbps), USB-C PD (100W), 1x USB-C (10Gbps), 1x USB-A (10Gbps), HDMI 2.0, SD and microSD card readers, 3.5mm audio
• Compatible with: All USB-C iPads

Why we love it: This ergonomic iPad accessory is both a USB-C dock and a convenient stand for up to a 12.9-inch iPad Pro.

It features a broad range of ports, including a 4K at 60Hz HDMI 2.0 port, a spare USB-C port and a legacy USB-A port, both SD and microSD card readers at their fastest, and a combination In/Out audio port. It connects to the iPad via its USB-C port, and an 6.7-inch (180mm) USB-C cable is included.

When folded it measures 4.3 x 4.3 x 0.75 inches (110 x 110 x 19mm) and weighs 6.6oz (187.5g). The iPad is tilted on the stand for a better height and viewing angle.

An alternative with longer USB-C cable, more adjustable stand and more ports but a lower 5Gbps bandwidth and with slower card readers is the Anker USB-C Hub, and the slightly cheaper Plugable UDS-7IN1 Dock, reviewed below.

• Colors: Space Gray
• Ports: USB-C (to iPad), USB-C PD (5Gbps/91W), 2x USB-A (5Gbps), HDMI, SD and microSD card readers, 3.5mm audio
• Compatible with: All USB-C iPads

Why we love it: Smaller than the Anker 551 Hub Stand, the diminutive Plugable USB-C Docking Station features two old-school USB-A ports, HDMI 1.4 port, both SD and microSD card readers and a combination In/Out audio port. It connects to the iPad via its USB-C port, and a 20-inch (50cm) USB-C cable is included.

At the back, alongside the HDMI port is another USB-C port that you can connect to a USB-C wall charger to allow up to 91W charging for the connected device—plenty for even the hungriest iPad. The USB-A ports aren’t really built for charging connected devices, so are limited to 4.5W charging.

With the HDMI 1.4 port you can connect a 4K external display at 30Hz. Gamers and streamers might prefer a hub with at least HDMI 2.0 to get smoother 60Hz screen refresh rates (so should consider the Satechi Hub/Stand reviewed above), but for general productivity usage 30Hz is perfectly acceptable. The Ugreen Steam Deck Dock, reviewed below, goes even further to 120Hz.

Made of aluminum, it’s light enough (10.7oz or 303g) to be carried around and it folds up for added portability points. Like the Anker Stand the tablet can be tilted on the stand for the best viewing angles.

• Colors: Black
• Ports:  USB-C (to iPad), USB-C PD (85W), USB-A (480Mbps, 7.5W), HDMI 2.0, Audio Out
• Compatible with: All USB-C iPads

Why we love it: This small hub can connect to your iPad (or MacBook) via either the integrated USB-C connector or a detachable cable (20in). The cable is useful if your iPad is in a protective case, and you could use your own longer cable if required. StayGo mini adds just four ports, but enough for you to attach an external display (4K at 30Hz), a USB-A device and headphones as well as powering your tablet or laptop at the same time–especially handy for tablets that have just the one port.

It weighs just 36g and measures 2.8 x 1.25 x 0.3 inches (7.2 x 3.2 x 0.8cm), making it one of the smallest USB-C iPad hubs we have tested—the Satechi Mobile XR Hub, reviewed above, is even tinier.

This hub—unlike the Satechi Mobile XR Hub—does host an old-school USB-A port. It’s USB 2.0, so limited to 480Mbps data transfer compared to the 5Gbps on offer on some of the other hubs reviewed here.

Twelve South has discontinued this product but it’s still currently selling via some retailers. Check our price comparison above.

• Colors: Gray
• Ports: USB-C (to iPad), USB-C PD (5Gbps/60W), one USB-A (5Gbps), one HDMI 2.0 port, UHS-I SD and microSD Card readers, 3.5mm audio, Play/Pause/Fast-forward/Rewind buttons
• Compatible with: All USB-C iPads

Why we love it: Alongside the handy extra ports, this mini hub adds a row of large Play/Pause/Fast-forward/Rewind buttons on the top for media control of your movies, songs or podcasts without interrupting your workflow.

We’ve seen faster ports on the other hubs reviewed here, but it’s the media buttons that make the difference here.

It can connect in a tight fit to the iPad or via a detachable longer 2in cable if you need the extra length.

At 3.85 x 1.14 x 0.47 inches (9.8 x 2.9 x 1.2cm), it’s a little longer than other iPad hubs tested here, but it’s lightweight at just 1.62oz (46g).

• Colors: Gray
• Ports: Angled USB-C to iPad, one USB-C 85W PD, one USB-C (5Gbps), one HDMI, two USB-A (5Gbps), Gigabit Ethernet
• Compatible with: All USB-C iPads

Why we love it: Alongside the handy extra ports, this mini hub adds a row of large Play/Pause/Fast-forward/Rewind buttons on the top for media control of your movies, songs or podcasts without interrupting your workflow.

As its name (and picture above) suggests, this compact mini docking station is built for Steam Deck (OLED) gamers, but is equally adept when hooked up to an iPad. Its special power is its HDMI port that allows for connection to a 4K display at an impressive 120Hz screen refresh rate. VRR, FreeSync and G-Sync technologies provide a smoother gaming experience that eliminates screen tearing and stuttering.

It creates a foldable and portable yet sturdy stand with adjustable angles up to 90 degrees, and measures 6.7-x-4.4-x-1.45 inches (17 x 11.2 x 3.7cm).

• Colors: Black
• Ports: USB-C (to iPad, 10GBps), USB-C PD (80W), two USB-A (5Gbps), one HDMI 2.0 port, microSD Card reader, Gigabit Ethernet
• Compatible with: All USB-C iPads

Why we love it: The OntheGo 7-in-1 Multiport Adapter is a neat solution that can clamp magnetically to your iPad. Attach the adhesive ring to the back of the iPad or iPad case to create a place where you won’t even see the hub while you work.

The round hub has a 2.55-inch (6.5cm) diameter and sits just over an inch tall (2.7cm). It weighs 2.4oz (68g).

We’ve seen faster ports on some of the other hubs reviewed here, we love that magnetic fit, and the HDMI supports full 4K at 60Hz.

• Colors: Space Gray
• Ports: USB-C cable (to iPad, 10Gbps), USB-C PD (100W), USB-A (10Gbps), USB-A (5Gbps), HDMI, SD/microSD Card readers, Gigabit Ethernet
• Compatible with: All USB-C iPads

Why we love it: There are many USB-C hubs that are built for laptops that work just as well with tablets. This wired USB-C hub has just about everything. Notably, its card readers are rated at 170MBps, which is faster than most that are limited to 104MBps.

We’ve picked the Ugreen Revodok Pro 109 out for its broad range of ports, but there are many to choose from, so choose from the wide range at Ugreen, Anker, Satechi, Plugable and Baseus to pick out one that offers all you need at the right price.

Connecting to the iPad via a built-in USB-C cable, this type of wired hub is a little less neat than those that plug directly into the iPad’s port, but they offer far more ports. The ribbed aluminum alloy Revodok Pro 109 measures 5.55 x 2.3 x 0.6 inches (14 x 6 x 1.6cm).

• Colors: Space Gray, Black, Silver
• Ports: 4-in-1: USB-C cable (to iPad, 10Gbps), USB-C PD (100W), 2x USB-A (10Gbps), HDMI; 6-in-1: USB-C cable (to iPad, 10Gbps), USB-C PD (100W), 1x USB-A (10Gbps), 1x USB-A (5Gbps), HDMI, SD/microSD Card readers; 7-in-1: USB-C cable (to iPad, 10Gbps), USB-C PD (100W), 2x USB-A (10Gbps), HDMI, SD/microSD Card readers, Gigabit Ethernet
• Compatible with: All USB-C iPads

Why we love it: Satechi has a range of USB-C hubs that work with the iPad to choose from—with 4, 6 or 7 ports, depending on your needs. All can output 4K at 60Hz via the HDMI port, and charge the connected iPad at full speed—indeed the 100W passthrough power is enough for even the 14-inch MacBook Pro.

The smallest 4-in-1 lacks card readers and Ethernet, which might suit you just fine. The 6-in-1 adds the card readers but lacks Ethernet; one of its USB-A ports is a weaker 480Mbps for some reason. The 7-in-1 has the card readers and Ethernet, plus the two 10Gbps USB-A ports.

The card readers are rated at 104MBps, slower than the Ugreen’s 170MBps.

• Colors: Space Gray, silver
• Ports: USB-C (to iPad), USB-C PD (5Gbps/92W), USB-A (5Gbps), USB-A (5Gbps, BC 1.2 Fast Charge), HDMI, 3.5mm audio
• Compatible with: All USB-C iPads

Why we love it: The 92W passthrough charging is impressive. Although this may be overkill when used with a tablet, it makes a big difference when you use it with a laptop. The HDMI port means you can add an external display, and it can handle 4K displays at 60Hz.

This compact hub, with built-in USB-C connector, is one of the lightest we have tested, at just 44g (1.5oz). It’s also small, at 3.5 x 1.3 x 0.3 inches (9 x 3.2 x 0.9cm). As well as the HDMI and audio port, it features two USB-A ports, one for data (5Gbps) and one for fast charging (7.5W).

• Colors: Space Gray
• Ports:  Upstream Thunderbolt 4 (to iPad; 60W PD), three downstream Thunderbolt (40Gbps, 15W), four USB-A (10Gbps, 7.5W)
• Compatible with: All USB-C iPads

Why we love it: Apple’s iPad Pro (2021) models use 40Gbps Thunderbolt rather than 5Gbps USB-C, so to gain that full bandwidth a Thunderbolt hub is the best you can get.

This is a hub that you can also use for high 40Gbps MacBook bandwidth as well as with your iPad Pro. For maximum Mac bandwidth look to the $249 CalDigit Element 5 Hub that operates at up to 120Gbps, but you’ll pay a premium that maybe be overkill for an iPad user.

Choosing a hub or dock with a Thunderbolt connection standard makes perfect sense as it is backwards compatible with USB-C and so will work with any USB-C iPad too.

You won’t find more modern USB ports on a hub than on the later Element 5 Hub that has three downstream TB5 ports, two 10Gbps USB-C and three 10Gbps USB-A ports, but the Thunderbolt 4 model’s three downstream TB4 and four 10Gbps USB-A offer a lot of extension opportunities.

Both are larger than other dedicated iPad hubs. The TB4 model measures 4.48-x-2.74-x-0.7in (11.4-x-7-1.8cm) and weighs 6.2oz (180g), while the TB5 model is 4.5 x 2.75 x 1 inches (11.4 x 7 x 2.5cm) and 7oz (200g).

Recommended if you require multiple devices to connect to your iPad, and if you use it with a MacBook, too.

Read the Caldigit Thunderbolt 4 Element Hub review and CalDigit Element 5 Hub review.

• Colors: Gray
• Ports:  10Gbps USB-C to iPad, NVMe solid-state drive enclosure
• Compatible with: All USB-C iPads

While not a hub, we love this dinky but high-speed SSD enclosure that can host interchangeable storage with tool-free installation, which makes it easy to switch between multiple SSDs. It includes a lanyard USB-C cable so you shouldn’t need additional cables when traveling.

The enclosure supports 2230mm NVMe SSDs with speeds up to 10Gbps—Satechi claims this can transfer 3,000 high-res images in under a minute. A write lock switch protects files from accidental changes and malware.

It supports Apple’s high-quality ProRes Log video format on iPhone 15 Pro and later, although you’ll need extra software to use it with the iPad’s camera.